Chapter 79 Networked AV Mode
XGS2220 Series User’s Guide
580
Figure 432
PORT > Link Aggregation > Link Aggregation Control Protocol
The following table describes the labels in this screen.
Table 336 PORT > Link Aggregation > Link Aggregation Control Protocol
LABEL
DESCRIPTION
Active
Enable the switch button to enable Link Aggregation Control Protocol (LACP).
System Priority
LACP system priority is a number between 1 and 65535. The switch with the lowest system priority
(and lowest port number if system priority is the same) becomes the LACP “server”. The LACP
“server” controls the operation of LACP setup. Enter a number to set the priority of an active port
using Link Aggregation Control Protocol (LACP). The smaller the number, the higher the priority
level.
Use this section to enable LACP on trunks.
Group ID
The field identifies the link aggregation group, that is, one logical link containing multiple ports.
LACP Active
Select this option to enable LACP for a trunk.
Use this section to configure LACP timeout on ports.
Port
This field displays the port number.
