ZyXEL Communications MAX-306M1, User Manual

Page: 209 / 376

Chapter 18 The Remote Management Screens
User’s Guide
209
18.5.2 SNMP Options
Click TOOLS > Remote Management > SNMP to access this screen. Use SNMP
options to control SNMP access to your WiMAX Modem.
Figure 91 TOOLS > Remote Management > SNMP
The following table describes the labels in this screen.
Table 75 TOOLS > Remote Management > SNMP
LABEL DESCRIPTION
SNMP Configuration
Get Community
Enter the Get Community, which is the password for the incoming
Get and GetNext requests from the management station. The default
is public and allows all requests.
Set Community Enter the Set community, which is the password for incoming Set
requests from the management station. The default is public and
allows all requests.
Trap Community Enter the trap community, which is the password sent with each trap
to the SNMP manager. The default is public and allows all requests.
Trap Destination Enter the IP address of the station to send your SNMP traps to.
SNMP
Port
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Access Status Select the interface(s) through which a computer may access the
WiMAX Modem using this service.