Ziton ZP3, Installation Operation & Maintenance

Page: 26 / 239

ZP3 Fire Control Panel
System Overview
ZP3 Fire Control Panel Manual
Page 1 - 14 UD1160.1 Iss 6 (25/02/2005)
I
1
1.2.6 Control Outputs
The ZP3 panel supports the connection of programmable control outputs for various
functions. These are switched outputs available as both voltage-outputs, and voltage-free
contacts.
Switched 24-volt dc outputs are used for operating system fire-alarm devices such as bells,
sounders, indicators, and similar devices. Certain control-outputs are designed to be used
for the control of automatic gaseous fire extinguishing systems.
Voltage-free change-over contacts are used to provide control-outputs to interface with
building functions which must be controlled when a fire alarm occurs. Typical uses are air-
conditioning and ventilation control, damper release, stairwell pressurization, door magnets,
etc.
All control-outputs are addressable, and fully programmable. Different types of control-
outputs connect to different system loops, as follows.
Z-Loop: Line relays (voltage-free contact), sounder drivers (voltage o/p) etc. Up to
127 devices per loop.
ICB-bus: Local in-panel relay boards (voltage-free contact), sounder boards (voltage
output), open-collector transistor outputs (low-current). Up to 72 outputs,
depending on type.
SCB-bus: Remotely located relay boards (voltage-free contact), monitored output
boards (voltage output), open-collector transistor outputs (low-current). Up
to 896 outputs, dependent upon space allowed.
CONTROL OUTPUTS
CONTROL
OUTPUTS
SOUNDER OUTPUTS
SOUNDER
OUTPUTS
Z-LOOP
SCB-BUS
SCB-D COP
COP
SCB
I/F
MOP
MOP
CIP
CIP
S-COM
Z-NET
REMOTE
CONTROL
PANEL
ZP3 PANEL
ZP3 CORE
CONTROL
OUTPUTS