Ziton ZP3, Installation Operation & Maintenance

Page: 200 / 239

ZP3 Fire Control Panel
Maintenance
ZP3 Fire Control Panel Manual
Page 1 - 10 UD1160.M Iss 6 (25/02/2005)
I
M
1.3.3 Menu Functions
Edit disabled
Menu Path: Maintenance\ Edit disabled
The Edit Disabled menu groups together all functions relating to enabling and disabling
points, zones and outputs.
Point To enable or disable a point, accept the default point
address displayed or enter the address of the point to be
edited. The point address and current state are
displayed. Use the scroll feature to display the
next/previous point to be edited.
Zone To enable or disable a zone, accept the default zone
number displayed or enter the zone number to be edited.
The zone number and status will be displayed. Where the
points in a zone are not all set to any one status, the
status is shown as "various settings". Using the scroll
feature will display the number of points in the zone and
the totals of enabled/disabled points within the zone.
Extinguish sys This menu enables or disables Gas Control Unit's. Only
valid GCU addresses are displayed. Use the scroll
feature to select the GCU to edit.
Sounders This menu enables or disables a sounder output. Only
outputs and points declared as sounders are displayed.
Use the scroll feature to select the sounder to edit.
Outputs To enable or disable an I/O mapped output, accept the
default output address displayed or enter the address of
the output to be edited. The output address and status
are displayed. Use the scroll feature to display the output
to be edited.
Remote alarm This menu enables or disables the remote alarm relay
(fire brigade) switched outputs. Both the alarm and fault
outputs may be edited in this menu.