Ziton ZP3, Installation Operation & Maintenance

Page: 111 / 239

ZP3 Fire Control Panel
Software Programming
ZP3 Fire Control Panel Manual
UD1160.6 Iss 6 (25/02/2005)
Page 6 - 3
I
6
Setup Menu
The main menu is the entry point to all of the user operator accessible software functions.
The main menu is invoked by pressing the MENU key. The display will then show the
following:
Press key 3 to enter the Setup Menu. You will be requested to enter an access code. Key-in
the setup (level 3) ACCESS CODE, and press the "Enter" key. The following screen will
appear.
The menu name is displayed on the top line, and the menu items are shown with numbers
alongside. Menu items are selected by pressing the numeric key that matches the item
number. Selecting a menu item may cause another menu to be called up or may carry out a
particular function. The operator may be prompted to enter, via the keypad, required
information.
Any menu can be cancelled and the previous menu presented by pressing the ESC key. The
ESC key is used to cancel or abort the current activity and return to that preceding it.
The menu system can be exited completely by pressing the HOME key, which returns the
panel to its normal operation display. In order to prevent a system from being inadvertently
left in a menu, a time-out is built into the menu system. The time is from the last time a key
was pressed. In menu selection, the time-out is approximately 45 seconds, and if a software
function has been started and not completed, then it is 12 minutes.