Ziton ZP3, Installation Operation & Maintenance

Page: 172 / 239

ZP3 Fire Control Panel
Operators Instructions
ZP3 Fire Control Panel Manual
Page 1 - 12 UD1160.O Iss 6 (25/02/2005)
I
O
1.4.2 LCD Display : Overview
ZP3 panels utilize a carefully structured reporting system for alarms, faults, and other events.
Information is displayed on a 160character LCD screen. The display has two alarm screens,
the "Zone Screen" which shows alarms by zone, and the "Point Screen" which shows alarms
by device. The Zone Screen displays automatically, and the Point Screen is accessed
manually. All events are prioritized and the system provides simple operation.
Alarms by Zone
Alarms are first displayed by zone, with a
zone message identifying the location.
Two zone are always visible, the top line
being the first alarm received, and the
bottom line being the last alarm received.
Scrolling Alarms
If the system has more than two zones in
alarm, then the "more" LED illuminates,
and you can scroll through alarms with
the scroll keys. After scrolling, the system
will revert to the first and last alarms on-
screen.
Alarms by Device
Press "View Point" to see current alarms
by device. The device screen displays
the exact address of the device, and a
message with its exact location.
HELP
ACCEPT
MUTE
BUZZER
RESET FIRE FAULT DISABLED OTHER
SILENCE
ALARMS
SOUND
ALARMS
MORE
VIEW
POINTS
Event Number
Type of Alarm
1st Alarm Received
2nd Alarm Received
Alarm Category
Being Viewed
Zone Number
Total number
of Alarms
Time of Alarm
Zone Location/
name
Indicates "Zone"
screen
1st Alarm Received
Last Alarm Received
"More" Alarm LED's
Up/Down Scroll Buttons
HELP
VIEW
POINTS
View Points Button