Ziton ZP3, Installation Operation & Maintenance

Page: 118 / 239

ZP3 Fire Control Panel
Software Programming
ZP3 Fire Control Panel Manual
Page 6 - 10 UD1160.6 Iss 6 (25/02/2005)
I
6
Points: Individual setting: view
Menu Path: Setup\ points\ Individual settings\ View
This menu enables the operator to view the configurations of a individual points connected to
the Z-loops. The options available are:
Sensitivity/AVF View the sensitivity to which a sensor is set. After
entering this menu, the following options are provided.
Sensitivity point: Sensitivity settings for an individual
point. Enter the point address. The device type, zone and
sensitivity settings are displayed. Use the scroll feature to
view the next/previous point.
Sensitivity point range: Sensitivity settings viewed on a
group basis by zone and device type. Enter the zone
range (or all), and the device types (or all) and then use
the scroll feature to view.
AVF point: Alarm verification settings for an individual
point. Enter the point address. The device type, zone and
AVF setting are displayed. Use the scroll feature to view
the next/previous point.
AVF point range: Alarm verification settings viewed on
a group basis by zone and device type. Enter the zone
range (or all) and device type (or all) and then use the
scroll feature to view.
Zones View the point addresses of all devices allocated to a
zone. Enter the zone number to be viewed. The zone
number and first point address in that zone is displayed.
Use the scroll feature to view the next/previous address
in that zone.
Messages View the identification message assigned to each point
address. Enter the point address. The message is
displayed. Use the scroll feature to view the
previous/next point address.
Sounder View which sensors are fitted with sounder bases. The
address of the first sensor with sounder base is displayed
together with the total number of sensor/sounder base
points. Use the scroll feature to view the list.
Detector test View which sensors have their self-test feature enabled.
Enter the point address for the point to be viewed. Use
the scroll feature to view the previous/next point.