Ziton ZP3, Installation Operation & Maintenance

Page: 27 / 239

ZP3 Fire Control Panel
System Overview
ZP3 Fire Control Panel Manual
UD1160.1 Iss 6 (25/02/2005)
Page 1 - 15
I
1
1.2.7 Control Inputs
The ZP3 system allows for the connection of input devices to be monitored for status. These
devices must have a voltage-free contact, which changes state when the device status
changes.
The contacts of the devices being monitored can be connected to interface units, which are
on the Z-Loop, or in the panel attached to the ICB-bus, or remote from the panel attached to
the SCB-bus. All control inputs are addressable and programmable.
The following describes the location and function of different control-inputs.
Z-Loop: Interface units, various types. For monitoring fire-functions, non-fire control
functions, security functions, etc. Up to 127 devices per loop.
ICB-bus: Local in-panel control-input boards for monitoring non-fire control functions.
Space dependent, up to 32 inputs.
SCB-bus: Remotely located control-input boards for monitoring non-fire control
functions. Up to 255 control-inputs, dependent upon space allowed.
CONTROL INPUTS
CONTROL
INPUTS
Z-LOOP
SCB-D COP
COP
SCB
I/F
MOP
MOP
CIP
CIP
S-COM
Z-NET
REMOTE
CONTROL
PANEL
ZP3 PANEL
ZP3 CORE
CONTROL
INPUTS