Ziton ZP3, Installation Operation & Maintenance

Page: 185 / 239

ZP3 Fire Control Panel
Operators Instructions
ZP3 Fire Control Panel Manual
UD1160.O Iss 6 (25/02/2005)
Page 1 - 25
I
O
1.6.3 Menu Functions
The menu functions available in the operator menu are described below, together with the
menu-path to access each menu, and an explanation of the purpose of each item.
Time and Date
Menu Path: Operator\Time and date
This menu provides for the date and time displayed by the panel to be set. Use the numeric
keys to enter the date and time.
Date The current date in the system is shown. Enter the new
date in DDMMYYYY format, use the up/down navigation
keys to change the day, and press ENTER.
Time The current time in the system is shown. Enter the new
time in 24-hour HHMM format and press ENTER.
Reports to Display
Menu Path: Operator\Reports to Display
This menu provides a selection of reports to be viewed on the display. Report messages
may be manually or automatically scrolled.
Point status This option allows the status of any device attached to
the panel Z-loops to be viewed on the LCD screen. The
report will show the type, sensitivity, zone and condition
of the point.
Software version This option displays on the LCD screen the software
number and version used by the panel.
Archives This allows the operator to view on the LCD screen
previous alarms and events, which are stored as
"archives" in the panel. The panel automatically stores
the last 1000 events, together with the date and time of
each. The menu allows the events to be selected by
date, and viewed accordingly. Use the up/down scroll
buttons to display the next/previous archived message.
System status This option displays status information of outputs and
points. Options are available to limit the report to disabled
points, or Gas Control Units.