ZP3 Fire Control Panel
Software Programming
ZP3 Fire Control Panel Manual
UD1160.6 Iss 6 (25/02/2005)
Page 6 - 13
I
6
Points: Global settings: Editing
Menu Path:
Setup\Points\Global
settings\Editing
This menu provides the ability to simultaneously programme a set of attributes for a group of
point addresses as follows. After programming globally with this menu, certain individual
devices which need different attributes can be changed in the "Points" menu.
Sensor sensitivity
High, medium, standard, low
Fire AVF
(Alarm verification) enabled or disabled
Fault AVF
(Alarm verification) enabled or disabled (Global only)
Sounder base
Attached or not
Detector self-test
Enabled or disabled
Points: Accept points:
Menu Path:
Setup\Points\Accept points
Selecting this menu instructs the panel to carry out a self-learning process, to accept all
current devices attached to the Z-loops as the current system configuration. The panel
displays the message "Accepting points..." and counts down to zero (0). On completion, the
panel displays "Calibrating...". If a device was not accepted, it will be shown as
"unaccepted".
Sounders
Menu Path:
Setup\Sounders
This menu provides the tools for setting up system sounders. Loop devices and panel
outputs that operate sounders must be defined as such to the panel to ensure that they
behave correctly.
View SAB
View which Z-loop sensors have been defined as having
a sounder base (SAB). The point address of the first
sensor is displayed, plus the total number of sounder
bases. Scroll to view the list.
Edit SAB
Define which sensors have a sounder base. Add or
delete a point address.
View mapped
View of all outputs (Z-loop and panel outputs), which
have been defined
Sounders
As sounders in the I/O mapping tables. Scroll to view the
list.
Edit mapped
Define which outputs are sounders. The point address of
the first sounder is displayed, plus the total number
sounders in the list. Scroll to view the list. Addresses
can de added to or deleted from the list.
Summary of Contents for ZP3
