Ziton ZP3, Installation Operation & Maintenance

Page: 201 / 239

ZP3 Fire Control Panel
Maintenance
ZP3 Fire Control Panel Manual
UD1160.M Iss 6 (25/02/2005)
Page 1 - 11
I
M
View disabled
Menu Path: Maintenance\ View disabled
The disable view menu is used to view points, zones or outputs that have been disabled. A
"extinguish system" sub-menu is also provided to limit the points viewed to Gas Control
Units. Once a sub-menu is chosen, the first disablement in the category is displayed. Use
the scroll feature to view the next/previous disablement.
Points This option displays all points set to disabled.
Zones This option displays zones set to disabled. The zone
number of the first disabled zone and the number of
points within the zone is displayed.
Extinguish sys This option displays Gas Control Units (GCU's) set to
disabled.
Sounders This option displays sounders set to disabled.
Outputs This option displays I/O mapping outputs set to disabled.
The address of the first disabled output is displayed. Use
the scroll feature to view the next/previous disabled
output.
Remote alarm This menu views the enabled/disabled status of the
remote alarm relay (fire brigade) switched outputs. Both
the alarm and fault outputs may be viewed in this menu.
Enable all
Menu Path: Maintenance\ Enable all
This menu provides a quick method to enable points and outputs or both. The menu options
available are:
Enable all ...
Points This option enables all system Z-loop devices. This
includes sensors, callpoints, devices, zones and loop or
base sounders.
Outputs This option enables all panel outputs. This includes all
Gas Control Units, panel sounder outputs and the remote
manned centre output.
Points & outputs This option enables all Z-loop devices and panel outputs.
It is equivalent to selecting both options above.