START-UP
Laser TIRF 3
PM S1 LS Incubators
Carl Zeiss
02/2014
423683-7144-001
67
There are two possible ways of positioning the magnets:
−
(A) On the long sides of the incubator, in extended lines to the red markings.
−
(B) On the short sides of the incubator. In this case, ensure that the middle of each magnet
(Fig. 3-17/
2
) is directly opposite the red point (Fig. 3-17/
1
), otherwise the contact will not trigger.
The position of the magnets is shown by the red markings on the lid of the incubator. The red markings
are directly above the neutral point of the reed contacts.
1
Markings for positioning the magnets
2
Magnet
Fig. 3-17
Position of the magnets on the PM S1 LS incubator
Summary of Contents for TIRF 3
Page 1: ...Laser TIRF 3 Imaging System Operating Manual...
Page 110: ......
