START-UP
Carl Zeiss
PM S1 LS Incubators
Laser TIRF 3
66
423683-7144-001
02/2014
3.7.1
Mounting
The PM S1 LS incubator can be used in combination with different stages. To check compatibility, please
see the table in Section 2.9.1 on page 39.
•
Put the insert into the microscope stage.
•
Place the incubator on the heating insert.
Remove the film from the adhesive strips and attach both magnets to the corners of the rectangle as
shown in the diagrams below.
1
Temperature sensor (inside incubator)
2
Heated cover plate
3
Recesses for cables and covers for different inserts
4
Gas mixture outlet
5
Gas mixture inlet
6
TempModul S1 connector
7
Distribution box for laser safety connector
8
Laser safety switch
Fig. 3-16
Control and functional elements of the PM S1 LS incubator, viewed from above (A) and
below (B)
Summary of Contents for TIRF 3
Page 1: ...Laser TIRF 3 Imaging System Operating Manual...
Page 110: ......
