USING THE SLIDER LASER TIRF WITH CUSTOMERS' OWN LASERS
Laser TIRF 3
Basic kit laser safety Rev. 2
Carl Zeiss
02/2014
423683-7144-001
99
The distribution box for laser safety also has an optional coupler for a door interlock switch (Fig. 6-7/
7
).
Please contact your laser safety officer about connecting the door interlock switch.
•
Remove the green plug (Fig. 6-7/
7
) from the distribution box for laser safety.
•
Loosen the two screws of the plug and remove the jumper cable.
•
Connect the cable of the door interlock switch to the plug and tighten the two screws.
•
Connect the distribution box for laser safety.
1
Connection plug laser safety cover / incubator
2
Connection plug laser shutter for customer's own laser module
3
Connection plug Slider Laser TIRF
4
Connection plug remote control switch
5
Connection plug Axio Observer stand
6
Distribution box for laser safety
7
Connection / plug for door switch (interlock)
8
15 pin SUB HD socket – CAN-BUS
9
9 pin Lemo connector – safety signals to LSM
10
25 pin SUB-D socket – TIRF signals and external interlocks
11
Camera adapter
12
HXP, contact kit for illumination
Fig. 6-7
Connecting the distribution box to Axio Observer.Z1
Summary of Contents for TIRF 3
Page 1: ...Laser TIRF 3 Imaging System Operating Manual...
Page 110: ......
