Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 50 / 178

Overview of devices OPMI Lumera
®
i on floor stand
Version 9.2
Page 50 G-30-1720-en
Components of the stand
The stand is used to position and control the microscope. It comprises the
following components:
1 Suspension arm
with lamp housing. When the suspension arm is moved forward, the
surgical microscope is located in the park position. In this position, the
light turns off, and the device is reset to the user-specific start values,
e.g. XY or Focus Reset (see page 115).
2 Carrier arm
with control panel, display (5.7
″ control panel), and connector panel for
power supply, foot control panel, data transfer, etc.
3 Stand column
with supports for cables and foot control panel.
4 Stand base
with four casters for moving the entire system.
Fig. 10: Components
of the stand
1
2
3
4