Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 54 / 178

Overview of devices OPMI Lumera
®
i on floor stand
Version 9.2
Page 54 G-30-1720-en
Connector panel on the floor stand
1 Strain relief device
for securing power cord and video connection cable.
2 Potential equalization connector
3 Foot control panel connector
4 Remote port
for controlling external devices with a maximum breaking capacity
of 24 V/0.5 A.
5 Indicator window and sliding switch for rated voltage
The rated voltage displayed here must match the rated voltage of the
mains power available at the installation site. You can adjust the sliding
switch using a suitable tool.
6 Power input socket
7 Power output socket
for medical devices of max. 500 VA.
CAUTION Danger! Electrical voltage!
Only connect accessories and medical devices designated by ZEISS for use
with this system to the power outlet sockets.
•
When connecting other devices, make sure that safety is guaranteed
regarding admissible touch currents and ground leakage currents accord-
ing to IEC 60601-1.