Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 130 / 178

What to do in the event of malfunctions OPMI Lumera
®
i on floor stand
Version 9.2
Page 130 G-30-1720-en
Zoom error. The error can
be acknowledged.
If the error impairs your
work, please switch to the
manual mode and contact
ZEISS Service.
– e.g. jammed hardware If the error impairs your
work, switch to the
manual mode. Page 125
Focus error. The error can
be acknowledged.
If the error impairs your
work, please switch to the
manual mode and contact
ZEISS Service.
– e.g. jammed motor of
the focus system If the error impairs your
work, switch to the
manual mode. Page 125
System boot error. Please
reboot the system. Please
make sure that no function
buttons are pressed during
the booting process. – e.g. a button was
pressed during system
start Reboot the system. Make
sure not to press any
buttons during this
process. -
System error. The error can
be acknowledged.
If the error recurs, please
contact ZEISS Service.
– Unknown software or
hardware error. Acknowledge the error
and contact ZEISS Service
if it occurs again. -
Error message Possible cause Remedy Reference