Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 18 / 178

Version 9.2
Page 18 G-30-1720-en
Safety measures OPMI Lumera
®
i on floor stand
•
Never attempt to forcefully connect any electrical connectors (plugs, sock-
ets). If connection is not readily possible, check again whether the plug fits
the socket. If any of the connectors are damaged, have the ZEISS Service
team repair them.
•
When mounting accessory equipment, please make sure that the admissi-
ble total weight of the surgical microscope is not exceeded.
(See label “Maximum load” or chapter “Technical data”.)
•
When mounting non-ZEISS equipment, make sure that sufficient free
space is available for focus positioning.
Requirements to be met by the user
The device may be operated only by properly instructed and trained persons.
The operator must ensure that the personnel working with the system possess
the necessary qualifications and training.
•
Keep the instructions for use accessible to the operating personnel at all
times.
•
Modifications and repairs on this device or any ZEISS equipment operated
together with this device may only be performed by ZEISS Service.
Liability and warranty
Warranty and liability depend on the contractually stipulated conditions.
Loss of warranty
The manufacturer is not liable for damage caused by unauthorized persons
modifying the system. Furthermore, this will forfeit any rights to claims under
the warranty.