Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 109 / 178

OPMI Lumera
®
i on floor stand Operation
Version 9.2
G-30-1720-en
Page 109
Setting start value of light source
Here, you can set the start value for the brightness. You can change the
brightness at any time on the stand or foot control panel. The system reverts
to the defined start value after you:
– Switch the device on.
– Press the reset button (if the function is activated, see page 114).
– Set the device to its parking position (if the function is activated,
see page 115).
•
Press the <Light> button in the main menu.

The “Light” menu is displayed.
•
Adjust the light intensity start value in the range from 5 % to 100 %.
Press the
button to increase the light intensity and the button
to reduce it.

The selected light intensity is displayed as a percentage value between
the two buttons.
•
To save the changes, press the button.

The setting is saved for the specific user.
•
To return to the main menu, press the button.

The “Main menu” is displayed again.