Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 40 / 178

Overview of devices OPMI Lumera
®
i on floor stand
Version 9.2
Page 40 G-30-1720-en
System overview
OPMI Lumera i comprises the following key components:
1 Microscope
for the magnified visualization of the field of view.
2 XY coupling
for precise movement of the microscope in the horizontal XY plane.
3 Stand
for powering and controlling the functions of the microscope. The floor
stand comprises the suspension and carrier arms, the stand column,
and the stand base.
The carrier arm contains the control unit with all electrical supply systems
required for the control of the motorized microscope.
The suspension arm allows the surgical microscope to be positioned or
brought into its parking position (suspension arm in upward position).
The light turns off in the parking position, and functions like XY or Focus
Reset are reset to their stored start value. The downward travel of the
suspension arm can be limited as required.
A maneuvering handle is mounted on the stand column. This is used to
move the stand and to attach the foot control panel. The stand column is
equipped with cable supports on the left and right for winding up cables
before the unit is relocated.
The stand base is equipped with four steerable casters which make it
easier for you to position the system in the OR. The locking tabs of the
casters enable you to prevent the system from moving or rolling away
of its own accord.
4 Foot control panel (not shown in the illustration)
for controlling the major motorized functions of the microscope.