Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 57 / 178

OPMI Lumera
®
i on floor stand Overview of devices
Version 9.2
G-30-1720-en
Page 57
Components of the foot control panel
The foot control panel permits you to control various functions of the stand
and the surgical microscope. The assignment of the functions to the buttons
on the foot control panel is shown on the following page.
You can only control functions that are contained in the relevant equipment
(stand, surgical microscope). Only use the foot control panels mentioned here
and in the ordering data:
– Foot control panel with 14 functions, wireless (FCP WL)
– Foot control panel with 14 functions, wired (FCP), 3 m (optional)
– Foot control panel with 14 functions, wired (FCP), 6 m (optional)
Design
1 Connector
for connecting the connection cable with the connector panel of the
stand.
2 Silver-colored bracket
for storing the foot control panel on the stand.
Controls
– Buttons A, B, C, D, E, F
– Joystick K
The joystick K is used to control the XY coupling.
– Rocker switches G, H, I, J
The rocker switches are used to operate the “Zoom” and “Focus”
functions.
Storage
When not using the foot control panel, you can attach it to the column of the
floor stand using the silver-colored bracket.
1
2
B
D
F
A
C
E
I
G
J
H
K