Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 115 / 178

OPMI Lumera
®
i on floor stand Operation
Version 9.2
G-30-1720-en
Page 115
•
Select the functions to be started when the XY reset button is pressed.
The following functions are available:
– XY Reset
(the XY coupling moves to its center position)
– Focus Reset; always active
(the focus moves to its initial position)
– Zoom Reset
(the magnification is set to its preset start value)
– Light Reset
(the brightness is set to its preset start value)
•
To save the changes, press the button.

The setting is saved for the specific user.
•
To return to the main menu, press the button twice.

The “Main menu” is displayed again.
Configuring parking position
The parking position is reached when the suspension arm (1) is moved to the
topmost position. This automatically switches the light off.
The functions are reset to their stored start values, depending on the settings
made. Proceed as follows for user-specific settings:
•
Select <System Settings> <Park Position> in the main menu.

The “Reset Park Position” menu is displayed.
•
Select the functions to be performed when the parking position is
reached. The following functions are available:
– XY Reset
(the XY coupling moves to its center position)
– Focus Reset; always active
(the focus moves to its initial position)
– Zoom Reset
(the magnification is set to its preset start value)
– Light Reset
(the brightness is set to its preset start value)
1