Yealink W80 Administrator'S Manual Download Page 113

Page: 113 / 260

Administrator’s Guide for W80 DECT IP Multi-Cell System

110

Permitted
Values

-Disabled

-Enabled

Default

Web UI

Features > Alarm > Edit > Stop Alarm From Handset

Parameter

alarm.X.trigger_delay

[1]

<y0000000000xx>.cfg

Description

It configures the delay time (in seconds) to trigger the alarm from the handset.

Permitted
Values

Integer from 1 to 7200

Default

Web UI

Features > Alarm > Edit > Trigger Delay

Parameter

alarm.X.pre_alarm.handset_stop.enable

[1]

<y0000000000xx>.cfg

Description

It enables or disables to stop the pre-alarm (reminder before the alarm) from the handset.

Permitted
Values

-Disabled

-Enabled

Default

Web UI

Features > Alarm > Edit > Stop Pre-Alarm From Handset

Parameter

alarm.X.pre_alarm.delay

[1]

<y0000000000xx>.cfg

Description

It configures the pre-alarm time (in seconds) of the handset.

Permitted
Values

Integer from 0 to 7200

Default

Web UI

Features > Alarm > Edit > Pre-Alarm Delay

Parameter

alarm.X.ring.enable

[1]

<y0000000000xx>.cfg

Description

It enables or disables to play the ringtone when the handset initiates the pre-alarm.

Permitted
Values

-Disabled

-Enabled

Default

Web UI

Features > Alarm > Edit > Ring

Parameter

alarm.X.weekly.begin_time

[1]

alarm.X.weekly.end_time

[1]

<y0000000000xx>.cfg

Description

It configures the starting / ending time of the day for the handset to perform an alarm detection.

The alarm detection occurs on a random time between the starting time and the ending time.

Note

: If the configured starting time is greater than the ending time, such as 23:00-06:00, it means that

the alarm detection is enabled on the day from 00:00-06:00 and 23:00-00:00.

Permitted
Values

Time from 00:00 to 23:59

Summary of Contents for W80





































































































































































































































































Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands

Yealink W80, Administrator'S Manual

Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands