Yealink W80 Administrator'S Manual Download Page 127

Page: 127 / 260

Firmware Upgrade

124

Firmware Upgrade

When first using your device, we recommend updating to the latest firmware version.

There are two methods of firmware upgrade:

Manually, from the local system for a single device via the web user interface.

Automatically, from the provisioning server for a mass of devices.

Note

: We recommend that the devices running the latest firmware should not be downgraded to an earlier firmware version.

The new firmware is compatible with old configuration parameters, but not vice versa.

Topics

Firmware for Each Phone Model
Firmware Upgrade Configuration
Upgrading Multiple Handsets via Web User Interface

Firmware for Each Phone Model

You can download the latest firmware online:

http://sup-

port.yealink.com/documentFront/forwardToDocumentFrontDisplayPage

The following table lists the associated and latest firmware name for each device model (X is replaced by the actual
firmware version).

Product

Firmware Name

Example

DECT IP Multi-Cell System

W80DM/W80B: 103.x.x.x.rom

W80DM/W80B: 103.83.0.70.rom

W56H: 61.x.x.x.rom

W56H: 61.83.0.90.rom

W53H: 88.x.x.x.rom

W53H: 88.83.0.90.rom

CP930W: 87.x.x.x.rom

CP930W: 87.83.0.60.rom

DD phone: 66.x.x.x.rom

DD phone: 66.84.0.115.rom

W59R: 115.x.x.x.rom

W59R: 115.83.0.10.rom

Note

: The W80DM/W80B must work with the W56H/W53H/CP930W/DD phone handset running a specific firmware version.

When you register an older handset (not multi-cell version) to the base station, the handset firmware will be automatically
upgraded to a matched one.

Firmware Upgrade Configuration

Before upgrading firmware, you need to know the following:

Do not close and refresh the browser when the device is upgrading firmware via the web user interface.

Do not unplug the network cables and power cables when the device is upgrading firmware.

The following table lists the parameters you can use to upgrade firmware.

Parameter

static.firmware.url

<y0000000000xx>.cfg

Description

It configures the access URL of the firmware file.

Note

: When upgrading the DM, the registered base station will be upgraded automatically.

Permitted
Values

URL within 511 characters

Summary of Contents for W80





































































































































































































































































Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands

Yealink W80, Administrator'S Manual

Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands