Yealink W80 Administrator'S Manual Download Page 164

Page: 164 / 260

Administrator’s Guide for W80 DECT IP Multi-Cell System

161

Customizing Search Source File

Search Source File Attributes

The following table lists the attributes you can use to add source lists to the super search file:

Attributes

Valid Values

Description

id_name

local_directory_search

calllog_search

remote_directory_search

ldap_search

BroadSoft_directory_search

The directory list (For example, “local_directory_search” for the
local directory list).

Note

: Do not edit this field.

display_name

Local Contacts

History

Remote Phonebook

LDAP

Network Directories

The display name of the directory list.

Note

: We recommend that you do not edit this field.

priority

1 to 5

1 is the highest priority.

The priority of the search results.

enable

0/1

: Disabled

: Enabled.

Enable or disable the phone to search the desired directory list.

Customizing Search Source File

Open the search source file.

To configure each directory list, edit the values within double quotes in the corresponding field.

For example, enable the local directory search, disable the call log search and specify a priority.

Save the change and place this file to the provisioning server.

Search Source List Configuration

The following table lists the parameters you can use to configure the search source list.

Parameter

super_search.url

<y0000000000xx>.cfg

Description

It configures the access URL of the custom super search file.

Permitted
Values

URL within 511 characters

Default

Blank

Web UI

Directory > Settings > Search Source List In Dialing

Parameter

search_in_dialing.local_directory.enable

<y0000000000xx>.cfg

Description

It enables or disables the phone to automatically search entries from the local directory, and display
results on the pre-dialing/dialing screen.

Permitted

-Disabled

Summary of Contents for W80





































































































































































































































































Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands

Yealink W80, Administrator'S Manual

Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands