Yealink W80 Administrator'S Manual Download Page 29

Page: 29 / 260

Administrator’s Guide for W80 DECT IP Multi-Cell System

The valid format of the configuration value:

W80DM_DMMAC_DMIP

, for example: W80DM_001565FEFE3E_

10.82.9.231.

Note

: If you need to configure the option 43 for both DM IP and provisioning server address, the valid format is

http://192.168.10.25/W80DM_001565FEFE3E_10.82.9.231_W80DM

http://192.168.10.25/W80DM_

001565FEFE3E_10.82.9. 231_W80DM.cfg

, that is, the directory name of the configuration file or the file name is

"W80DM_001565FEFE3E_10.82.9.231_W80DM".

Connect the base to the network in the DHCP environment.

While obtaining the IP address, base can read the DM IP address in option 43 and automatically fill it into "DM
IP" configuration.

Base Station Settings

You can modify all settings of the registered base stations at the DECT manager.

Topics

Base Station Settings Configuration
Managing the Connected Base Stations

Base Station Settings Configuration

The following table lists the parameters you can use to modify the base station settings.

Parameter

station.X.name

[1]

<y0000000000xx>.cfg

Description

It sets the name of the base station.

Permitted
Values

String within 32 characters

Default

Base station X

Summary of Contents for W80





































































































































































































































































Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands

Yealink W80, Administrator'S Manual

Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands