Yealink W80 Administrator'S Manual Download Page 232

Page: 232 / 260

Configuration Parameters

229

Permitted
Values

-Disabled

-Enabled, the phone will carry the MAC address with colons (for example

00:15:65:7f:fb:7e

) in the

User-Agent header.

-Enabled, the phone will carry the MAC address without colons (for example

0015657ffb7e

) in the

User-Agent header.

Default

Parameter

account.X.blf.subscribe_period

[1]

<MAC>.cfg

Description

It configures the period (in seconds) of the BLF subscription.

Permitted
Values

Integer from 30 to 2147483647

Default

1800

Web UI

Handset & Account > Handset Registration > Add Handset/Edit > Subscription Period (Seconds)

Parameter

push_xml.sip_notify

<y0000000000xx>.cfg

Description

It enables or disables the phone to process the push XML via SIP NOTIFY message.

Note

: It is only applicable to modify configurations of the IP phones.

Permitted
Values

-Disabled

-Enabled

Default

[1]

X is the account ID. X=1-100.

Call Settings Parameters

Parameter

phone_setting.end_call_net_disconnect.enable

<y0000000000xx>.cfg

Description

It enables or disables the phone to end the call if the network is unavailable during the call.

Permitted
Values

-Disabled

-Enabled, the phone will end the call and go to the Idle screen after 5 seconds.

Default

Parameter

phone_setting.ringing_timeout

<y0000000000xx>.cfg

Description

It configures the duration time (in seconds) in the ringing state.

If it is set to 180, the phone will stop ringing if the call is not answered within 180 seconds.

Permitted
Values

Integer from 1 to 3600

Default

120

Summary of Contents for W80





































































































































































































































































Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands

Yealink W80, Administrator'S Manual

Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands