YASKAWA VIPA System SLIO Manual Download Page 93

Page: 93 / 380

Click to

‘PLC

Download’

Download

the dialog "Select target module" is

opened. Select your target module and enter the IP address parameters of the

Ethernet PG/OP channel for connection. Provided that no new hardware configura-

tion is transferred to the CPU, the entered Ethernet connection is permanently

stored in the project as transfer channel.

With [OK] the transfer is started.

System dependent you get a message that the projected system differs

from target system. This message may be accepted by [OK].

Your project is transferred and may be executed in the CPU after

transfer.

4.10.3

Transfer via memory card

The memory card serves as external storage medium. There may be stored several proj-

ects and sub-directories on a memory card. Please regard that your current project is

stored in the root directory and has one of the following file names:

S7PROG.WLD

AUTOLOAD.WLD

Start the Siemens SIMATIC Manager with your project

Create with

‘File

Memory Card File

New’

a new wld file.

Copy the blocks from the project blocks folder and the

System data

into the wld file.

Copy the wld file at a suited memory card. Plug this into your CPU and start it

again.

The transfer of the application program from the memory card into the CPU

takes place depending on the file name after an overall reset or PowerON.

S7PROG.WLD

is read from the memory card after overall reset.

AUTOLOAD.WLD

is read from the memory card after PowerON.

The blinking of the SD LED of the CPU marks the active transfer. Please regard

that your user memory serves for enough space for your user program, other-

wise your user program is not completely loaded and the SF LED gets on.

4.11 Accessing the web server

The CPU has a web server integrated. This provides access to:

Device web page

OPC UA

project

Chap. 4.11.1.1.1 ‘Tab: ‘OPC UA’ ’ page 97

WebVisu

project

Chap. 4.11.1.1.2 ‘Tab: ‘WebVisu’ ’ page 98

Proceeding transfer via

memory card

Overview

VIPA System SLIO

Deployment CPU 013-CCF0R00

Accessing the web server

HB300 | CPU | 013-CCF0R00 | en | 19-30

Summary of Contents for VIPA System SLIO





























































































































































































































































































































































































Search results

Summary of Contents for VIPA System SLIO

Reviews:

Brands by name

Popular brands

YASKAWA VIPA System SLIO, Manual

Search results

Summary of Contents for VIPA System SLIO

Reviews:

Brands by name

Popular brands