![background image](http://html.mh-extra.com/html/yaskawa/vipa-system-slio/vipa-system-slio_manual_907132070.webp)
6.
Use [New] to create a new subnet and assign valid IP address data for your
PROFINET system.
With firmware version V2.4.0 and up, you can access the Ethernet
PG/OP channel via this IP address data. The configuration via an
additional CP is no longer required, but still possible.
‘Hardware configuration - Ethernet PG/OP channel’ page 72
7.
Click at the sub module
‘PN-IO’
of the CPU and open with
‘Context menu
è
Properties’
the properties dialog.
8.
Enter at
‘General’
a device name. The device name must be unique at the Ethernet
subnet.
9.
Navigate in the hardware catalog to the directory
‘PROFINET IO
è
Additional field devices
è
I/O
è
VIPA SLIO System’
and connect the IO device
‘013-CCF0R00 CPU’
to your PROFINET system.
ð
In the slot overview of the PROFINET IO device
‘VIPA SLIO System’
the CPU
is already placed at slot 0. From slot 1 you can place your System SLIO
modules.
VIPA System SLIO
Deployment CPU 013-CCF0R00
Hardware configuration - CPU
HB300 | CPU | 013-CCF0R00 | en | 19-30
70