12.5 SPEED7 Studio - Hardware configuration - I/O modules
1.
Click in the
‘Project tree’
at
‘PLC... > Device configuration’
.
2.
Starting with slot 1 place in the
‘Device configuration’
your System SLIO modules
in the plugged sequence. For this drag from the hardware catalog the corre-
sponding module to the corresponding position in the
Device configuration
.
For parametrization double-click in the
‘Device configuration’
on the module you want to
parametrize. Then the parameters of the module are shown in a dialog. Here you can
make your parameter settings.
By using the SFCs 55, 56 and 57 you may alter and transfer parameters for wanted
modules during runtime. For this you have to store the module specific parameters in so
called "record sets". More detailed information about the structure of the record sets is to
find in the according module description.
12.6 Deployment I/O periphery
12.6.1
Overview
n
On this CPU the connectors for digital respectively analog signal and
Technological
functions
are combined in a one casing.
n
Die Project engineering happens in the VIPA
SPEED7 Studio
as CPU 013-CCF0R00.
n
For parametrization of the digital I/O periphery and the
technological functions
the
corresponding sub modules of the CPU013-CCF0R00 are to be used.
n
The controlling of the operating modes of the
technological functions
happens by
means of handling blocks of the user program.
Hardware configuration of
the modules
Parametrization
Parametrization during
runtime
Project engineering and
parametrization
VIPA System SLIO
Configuration with VIPA SPEED7 Studio
Deployment I/O periphery > Overview
HB300 | CPU | 013-CCF0R00 | en | 19-30
277