![background image](http://html.mh-extra.com/html/yaskawa/vipa-system-slio/vipa-system-slio_manual_907132161.webp)
Power supply
LED
green
Description
1L+
DC 24V electronic section supply OK
DC 24V electronic section supply not available
2L+
DC 24V power section supply outputs OK
DC 24V power section supply outputs not available
3L+
DC 24V power section supply SLIO bus OK
DC 24V power section supply SLIO bus not available
5L+
DC 24V power section supply inputs OK
DC 24V power section supply inputs not available
5.10 Diagnostic and interrupt
5.10.1
Overview
The parametrization allows you to define the following trigger for a hardware interrupt:
n
Edge at an digital interrupt input
n
Reaching the comparison value
n
Overflow respectively at overrun upper counter limit
n
Underflow respectively at underrun lower counter limit
n
Opening the HW gate with open SW gate - except for counter 3
n
Closing the HW gate with open SW gate - except for counter 3
The VIPA specific parameters allow you to define the following trigger for a diagnostics
Chap. 4.9 ‘Setting VIPA specific CPU parameters’ page 82
:
n
Hardware interrupt lost
n
Error: 2L+ DC 24V DO power section supply
n
Error: 3L+: DC 24V SLIO bus power section supply
n
Error: 5L+: DC 24V DI power section supply
n
Short circuit overload: Sensor
n
Short circuit overload: DO
5.10.2
Process interrupt
An interrupt for the corresponding channel operating mode can only be
triggered if you have additionally parameterized ‘DiagProcess’ at
‘Select interrupt’ of the ‘Basic parameters’ .
A process interrupt causes a call of the OB 40. Within the OB 40 you may find the logical
basic address of the module that initialized the process interrupt by using the Local word
6. More detailed information about the initializing event is to find in the
local double word
8
. The assignment of
local double word 8
depends on the parameterized operating mode
of each channel.
Hardware interrupt
Diagnostics interrupt
VIPA System SLIO
Deployment I/O periphery
Diagnostic and interrupt > Process interrupt
HB300 | CPU | 013-CCF0R00 | en | 19-30
161