Yamaha EF2000iS - Inverter Generator, Service Manual

Page: 80 / 312

2-24
AC PILOT LIGHT/OVERLOAD WARNING LIGHT
INSP
ADJ
AC PILOT LIGHT
1. Check:
9
AC pilot light
1
Checking steps:
9
Start the engine.
9
Check that the AC pilot light
1
turns
on.
Refer to “GENERATOR SYSTEM” in
CHAPTER 5.
å
For Canada and Australia
∫
For Europe and Korea
OVERLOAD WARNING LIGHT
The overload warning light
1
comes on when
an overload of a connected electrical device is
detected, the inverter control unit overheats, or
the AC output voltage rises. Then, the AC pro-
tector will trip, stopping power generation in
order to protect the generator and any con-
nected electric devices. The AC pilot light
(green) will go off and the overload warning
light (red) will stay on, but the engine will not
stop running.
When the overload warning light comes on
and power generation stops, proceed as fol-
lows:
1. Turn off any connected electric devices
and stop the engine.
2. Reduce the total wattage of connected
electric devices within the rated output.
å
For Canada and Australia
∫
For Europe and Korea
1
1
A
B
1
1
A
B
7DK40-02 6/15/09 2:58 PM Page 49