Yamaha 1998 FZS600 5DM1-AE1, Service Manual

Page: 283 / 364

7-64
A
B
SWINGARM AND DRIVE CHAIN
CHAS
NOTE:
NOTE:
NOTE:
EB707100
Before removing the drive sprocket, drive
chain, and rear wheel, measure the drive
chain slack and the length of a ten-link sec-
tion of the drive chain.
EB707111
REMOVING THE SWINGARM
1. Stand the motorcycle on a level surface.
Securely support the motorcycle so that
there is no danger of it falling over.
Place the motorcycle on a suitable stand so
that the rear wheel is elevated.
2. Remove:
side covers
connecting plate bolt 1
rear shock absorber assembly lower bolt
2
When removing the rear shock absorber as-
sembly lower bolt, hold the swingarm so that
it does not drop down.
3. Check:
swingarm side play
swingarm vertical movement
a. Check the tightening torque of the pivot
shaft nut.
Pivot shaft nut
115 Nm (11.5 m kg)
b. Check the swingarm side play
A
by mov-
ing the swingarm from side to side.
c. If the swingarm side play is out of specifi-
cation, check the spacers, bearings,
washers, and dust covers.
Swingarm side play (at the end
of the swingarm)
1 mm
d. Check the swingarm vertical movement
B
by moving the swingarm up and down.
If swingarm vertical movement is not
smooth or if there is binding, check the
spacers, bearings, washers, and dust
covers.