Installation and Setup
Phaser 6121MFP Multifunction Printer
User Guide
43
To install the MCC utility:
1. Do one of the following:
•
If the
Software and Documentation CD
is already in your computer’s CD drive and the setup
screen is still displayed on your computer screen, click
Back
to return to the screen that lists the
MCC Utility.
•
Insert the
Software and Documentation CD
into your computer’s CD drive. The installer will
start automatically unless you have autorun disabled on your computer. If the installer does
not start, navigate to your computer’s CD drive and double-click the
Setup.exe
installer file.
When the setup screen appears, click
Phaser 6121MFP/N / Phaser 6121MFP/D
.
Note:
If the
Software and Documentation CD
is not available, download the latest driver from
www.xerox.com/office/6121MFPdrivers
.
2. Click
Install MCC Utility (USB only)
.
3. In the Choose Setup Language screen, select your language and click
Next
.
4. At the InstallShield Wizard screen, click
Next
.
5. At the Choose Destination Location screen, click
Next
and then click
Next
again to accept the
default location.
6. Click
Finish
when the installer is done.
7. Close the installation screen and remove the CD from your computer’s CD drive.
Installing the Drivers for Macintosh
To access all features that come with your printer configuration, you must do the following:
•
Install the printer and scan drivers.
•
Add the printer to your computer’s printer queue. See
Adding the Printer for Macintosh
on
page 44.
Note:
Before installing drivers, verify that the printer is plugged in, turned on, and connected to
your computer by either a USB cable or connected to the same network as your computer.
Installing the printer driver places the driver in the correct folder for you to access when you add the
printer.
To install the printer and scan drivers:
1. If the printer will have a USB connection to your computer, do the following:
a. On the printer control panel, press the
Back/Menu
button to go to the System Menu (the menu
display will not read “System Menu” it will just show the System Menu contents), then press the
Down Arrow
button to go to
Connection Setup
and press the
OK
button.
b. Arrow down to
USB Setup
and press
OK
.
c. Arrow down to
Mac
and press
OK
.
d. After the setting has been accepted, press the
Back/Menu
button repeatedly until you reach
the default menu (the blue Ready light will be lit and steady).
2. Insert the
Software and Documentation CD
into your computer’s CD drive.
Note:
If the
Software and Documentation CD
is not available, download the latest drivers from
www.xerox.com/office/6121MFPdrivers
.
Summary of Contents for PHASER 6121MFP
