Xerox PHASER 6121MFP, User Manual

Page: 146 / 238

Control Panel Menus
Phaser 6121MFP Multifunction Printer
User Guide 146
Copy Menu
This section includes:
•
Copy Menu – Main on page 146
• Copy Default Setup Menu on page 147
To access the Copy Menu, press the
Copy
button on the control panel.
Copy Menu – Main
Menu Item Contents
Tray Specifies the tray to use and the type and size of the paper in the tray when
making copies.
Scale Specifies the image size of the copy in comparison to the original:
•
Manual : Enter the desired size.
• Preset Sizes : Select from a list of preset sizes.
Darken Specifies how light or dark the resulting copied image should be (also called
“copy density”).
Original Specifies the type of content being copied in the original document:
•
Mixed : Text with images/photos.
• Fine/Mixed : Text with images/photos at higher resolution.
• Photo : Photos only.
• Fine/Photo : Photos only at higher resolution.
• Text : Text only.
• Fine/Text : Text only at higher resolution.
Sides
(Phaser 6121MFP/D printer
configuration only.) Specifies the setting for 2-sided copying:
•
1 to 1 : Copying from one side to one side.
• 1 to 2 : Copying from two 1-sided pages to one 2-sided page:
Long Edge Flip : Copied pages are printed so that they flip over along
the long edge of the paper.
Short Edge Flip : Copied pages are printed so that they flip over along
the short edge of the paper.
Collate
(Phaser 6121MFP/N and /D
printer configurations only.) Specifies whether the copied pages of multi-page documents are printed in
order and sorted by copy set.
2-Up Copy
(Phaser 6121MFP/D printer
configuration only.) Enables two single-sided document pages to be copied and then printed
onto one side of a single sheet of paper. The copies are reduced to fit on
the size of the selected output page.