Xerox PHASER 6121MFP, User Manual

Page: 44 / 238

Installation and Setup
Phaser 6121MFP Multifunction Printer
User Guide 44
3. At the installation screen, do one of the following:
• If your printer is a Phaser 6121MFP/N or /D, double-click Xerox Phaser 6121MFP/N / Xerox
Phaser 6121MFP/D
.
• If your printer is a Phaser 6121MFP/S, double-click
Xerox Phaser 6121MFP/S
.
Note: If you are not sure which printer configuration you have, see What Type of Printer Do I Have?
on page 30.
4. At the Introduction screen, click Continue .
5. At the next screen, click Install .
6. When the installer is finished, the Install Succeeded screen appears. Click Finish .
7. Continue to Adding the Printer for Macintosh on page 44.
Adding the Printer for Macintosh
This section includes:
•
Adding the Printer – OS X Version 10.3 on page 44
• Adding the Printer – OS X Version 10.4 on page 45
• Adding the Printer – OS X Version 10.5 on page 45
Adding the Printer – OS X Version 10.3
To add the printer to your list of printers:
1. Open the
Applications folder and then open the Utilities folder.
2. Open the Printer Setup Utility .
3. Click Add .
4. Do one of the following:
• If your computer has a network connection to the printer, confirm that the first drop-down
menu is set to
Rendezvous
.
• If your computer has a USB connection to the printer, confirm that the first drop-down menu is
set to
USB .
5. In the window, select your printer.
6. From the Printer Model drop-down list, select
Xerox .
7. Select your printer model from the list of Xerox printers and then click Add .
Note: If your printer was not detected, verify that the printer is on and that the Ethernet or USB
cable is connected properly.