Xerox PHASER 6121MFP, User Manual

Page: 130 / 238

Faxing
Phaser 6121MFP Multifunction Printer
User Guide 130
Changing the Default Fax Job Settings
Fax default job settings include Auto Redial, fax COMM settings, fax regional settings, send and receive
options, and fax reports. For an explanation of each default setting, see
Fax Default Setup Menu on
page 154.
To change the default fax job settings:
1. On the printer control panel, press the
Fax
button.
2. Press the
Down Arrow
button to go to
Fax Default Setup
and then press the
OK
button.
3. Use the
Up Arrow
or
Down Arrow
buttons to select the setting you want to change, then press
OK
.
4. Change the setting, press
OK
, and then, to exit the menu, you can press the
Stop/Reset
button or
the Back/Menu button.
Note: The Fax COMM, Send Options, and Receive Options menu settings can be reset to their
factory defaults. Just select the menu, arrow down to Reset to Default? and press OK .
See also:
Changing the Default Fax Send Options on page 123
Changing the Default Fax Receive Options on page 129