![background image](http://html2.mh-extra.com/html/xerox/phaser-6121mfp/phaser-6121mfp_user-manual_3474141037.webp)
Installation and Setup
Phaser 6121MFP Multifunction Printer
User Guide
37
IP address for the printer, you must manually assign a network address to the printer. For information,
see
Assigning a Static IP Address
on page 37.
Assigning a Static IP Address
Notes:
•
These instructions are for Phaser 6121MFP/N or /D printer configurations connected by an
Ethernet cable to a network.
•
To assign a static IP address, you must disable both DHCP/BOOTP and AutoIP as described
below.
•
To cancel your selections when entering information (before you press the OK button), press the
Stop/Reset
button until you reach the desired screen.
To assign a static IP address to the printer:
1. On the printer control panel, press the
Back/Menu
button to enter the System Menu.
2. Press the
Down Arrow
button to go to
Connection Setup
and then press the
OK
button.
3. Select
Network Setup
, then press
OK
.
4. Arrow down to
DHCP/BOOTP
, press
OK
, select
Disable
and then press
OK
again.
5. Arrow down to
Auto IP
, press
OK
, select
Off-Manual
and then press
OK
again.
6. Arrow down to
IP Address
and press
OK
.
7. Using the keypad buttons, enter the IP address provided by your IT service or Internet service
provider (ISP). Press
OK
when finished.
8. In the
Subnet Mask
line, use the keypad to enter the Subnet Mask address and then press
OK
.
9. In the
Gateway
line, use the keypad to enter the Gateway Address. Press
OK
when finished.
10. To exit the System Menu, press the
Back/Menu
button until you return to the default main screen.
Finding Your Printer’s IP Address
Note:
These instructions are for Phaser 6121MFP/N or /D printer configurations connected by an
Ethernet cable to a network.
The printer’s IP address is printed on the Configuration page and can be displayed on the printer
control panel.
To print the Configuration page:
1. On the printer control panel, press the
Back/Menu
button to enter the System Menu.
2. Press the
Down Arrow
button to go to
Print Config Page
and then press
OK
.
The printer’s IP address is listed in the
Network Setting
section of the page.
To get the printer’s IP address from the printer control panel:
1. On the printer control panel, press the
Back/Menu
button to enter the System Menu.
2. Press the
Down Arrow
button to go to
Connection Setup
and then press
OK
.
3. At
Network Setup
, press
OK
.
4. Arrow down to
IP Address
and press
OK
.
From here you can view the printer’s IP address, Subnet Mask address, and Gateway address.
Summary of Contents for PHASER 6121MFP
