Xerox Phaser 3010, Service Manual

Page: 296 / 430

4-86 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Service Parts Disassembly
WorkCentre 3045 Xerographics
Xerographics Assembly
This procedure removes the developer and xerographic housings as a single unit.
PL3.1.5
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-52).
10. Remove the Rear Cover (page 4-11).
11. Remove the Toner Motor (page 4-37).
12. Remove the Toner Dispense Assembly (page 4-36).
13. Remove the Fuser (page 4-38).
14. Remove the MCU Board (page 4-43).
15. Remove the HVPS (page 4-98).
16. Remove the Power Switch Assembly (page 4-46).
17. Remove the LVPS (page 4-48).
18. Remove the LVPS bracket (page 4-107).
19. Remove the Rear Door Interlock Switch (page 4-44).
20. Remove the IP Board (page 4-45).
21. Remove the Fax Board if present (page 4-105).
22. Remove the IP Board bracket (page 4-106).
23. Remove the Main Drive Assembly (page 4-40).
24. Remove the Main Drive Motor (page 4-41).