Xerox Phaser 3010, Service Manual

Page: 177 / 430

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 3-3
Image Quality
Repeating Defects
Checklist Before Troubleshooting Print-Quality
Check Printer Condition
Toner
Low toner can cause print-quality problems, such as fading, streaking, White lines,
or dropouts. Print a small document from different software applications to
replicate the problem and check the amount of toner available. If the toner is low,
replace the cartridge.
Toner that is not genuine Xerox toner can also cause print-quality problems. If the
toner is not Xerox toner, replace the Toner Cartridge and recheck the print-quality
issue.
Cleaning
Paper, toner, and dust particles can accumulate inside the printer and cause print-
quality problems such as smearing or specks. Clean the inside of the printer to
reduce these problems.
Developer Assembles Component
Roll Diameter
(mm)
Interval (mm)
Transfer Roller Transfer Roller 14.40 45.24
Fuser Heat Roller 21.37 67.77
Xerographic Assy magnet roller 12.50 21.74
drum 30 94.25
BCR roll 9 28.27
BCR clean roll 8 25.13