Xerox Phaser 3010, Service Manual

Page: 14 / 430

xiv Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Manual Organization
The Phaser 3010/3040/WorkCentre 3045 Service Manual contains these sections:
Introductory, Safety, and Regulatory Information: This section contains
important safety information and regulatory requirements.
Chapter 1 - General Information: This section contains an overview of the
printer’s operation, configuration, specifications, and consumables.
Chapter 2 - Error Codes and Troubleshooting: This section provides detailed
troubleshooting procedures for error messages and codes generated by resident
diagnostics. Troubleshooting covers the operation of Power On Self Test (POST)
and Service Diagnostics. In addition, this section includes troubleshooting
methods for situations where error indicator is not available.
Chapter 3 - Image Quality Troubleshooting: This section focuses on techniques
to correct image quality problems associated with the printer output.
Chapter 4 - Service Parts Disassembly: This section contains removal procedures
for spare parts listed in the Parts List. A replacement procedure is included when
necessary.
Chapter 5 - Parts List: This section contains exploded views of the print engine
and optional Field Replaceable Units (FRUs), as well as part numbers for orderable
parts.
Chapter 6 - Maintenance: This section provides periodic cleaning procedures for
the printer. This section also provides procedures for the adjustment of print
engine components
Chapter 7 - Wiring: This section contains the plug/jack locations and wiring
diagrams for the printer.
Appendix - Reference: This section describes the operation of the CE Diagnostic
software used to test Phaser 3010/3040 operation.