Xerox Phaser 3010, Service Manual

Page: 106 / 430

2-52 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Error Troubleshooting
Busy Tone
Detection Enable Busy Tone Detection 0: Disable, 1: Enable
On duration (Max duration) 0~80 (10 ms)
On duration (Min duration) 0~30 (10 ms)
Off duration (Max duration) 0~80 (10 ms)
Off duration (Min duration) 0~30 (10 ms)
No. of cycle for busy
condition 0: 3, 1: 4, 2: 5, 3: 6
Power Threshold 0: 35 dB, 1: 36 dB, 2: 37 dB,
3: 38 dB, 4: 39 dB, 5: 40 dB,
6: 41 dB, 7: 42 dB, 8: 43 dB,
9: 44 dB, 10: 45 dB, 11: 46 dB,
12: 47 dB, 13: 48 dB,
14: 49 dB, 15: 50 dB
TEL/FAX Power Threshold 0: -22dB, 1: -24dB, 2: -26dB,
3: -28dB, 4: -30dB, 5: -32dB,
6: -34dB, 7: -36dB
Dial Tone
Detection Enable Dial Tone Detection 0: Disable, 1: Enable
Validation time 6~30 (100ms)
Power Threshold 0: 35 dB, 1: 36 dB, 2: 37 dB,
3: 38 dB, 4: 39 dB, 5: 40 dB,
6: 41 dB, 7: 42 dB, 8: 43 dB,
9: 44 dB, 10: 45 dB, 11: 46 dB,
12: 47 dB, 13: 48 dB,
14: 49 dB, 15: 50 dB
Call Progress
Tone
Freq. Filter Call Progress Tone Freq. Filter 0: 340Hz ~ 560Hz
1: 310Hz ~ 485Hz
2: 363Hz ~ 502Hz
3: 276Hz ~ 504Hz
4: 415Hz ~ 460Hz
5: 310Hz ~ 640Hz
6: 370Hz ~ 525Hz
RX Power Rx Call Detection level 0: -36dB, 1: -37dB, 2: -38dB,
3: -39dB, 4: -40dB, 5: -41dB,
6: -42dB, 7: -43dB, 8: -44dB,
9: -45dB, 10: -46dB, 11: -47dB,
12: -48 dB
TX Power Tx Cable Equalizer 0: 0dB, 1: 2dB, 2: 4dB, 3: 6dB,
4: 8dB, 5: 10dB, 6: 11dB,
7: 12dB
Tx Signal Level 0: -3 dB, 1: -4 dB, 2: -5 dB,
3: -6 dB, 4: -7 dB, 5: -8 dB,
6: -9 dB, 7: -10dB, 8: -11 dB,
9: -12 dB, 10: -13dB, 11: -14 dB,
12: -15 dB, 13: -16 dB,
14: -17 dB, 15: -18 dB
External
Hook
Threshold High voltage High (20 ~ 40 V)
Medium voltage Medium (10 ~ 19 V)
Low voltage Low (10 ~ 19 V)
Parameter Menu Value Options