Xerox Phaser 3010, Service Manual

Page: 38 / 430

1-16 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
General Information
Electrical
• IP Board
The Image Processor Board is the print controller. The IP Board converts print
data to image data.
• MCU Board
Controls the print operation based on communication with the print controller
and on the information from the sensors or switches.
• HVPS
Supplies high voltage to the xerographic assembly and Transfer Roller.
• LVPS
Supplies the AC power from the power supply to the heater section of the
Fuser and generates stable low DC voltage to be used by the logic circuits and
other components.
• Power Switch Assembly
Power switch and AC inlet harness providing AC to the LVPS and Fuser.
• USB Board
Porvides a USB interface for thumbdrives.
• Wireless Interface Board
IEEE wireless ethernet interface board.
• FAX Board
FAX MODEM board for FAX transmissions.