Xerox Phaser 3010, Service Manual

Page: 186 / 430

3-12 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Image Quality
Toner Smears
There are faded or completely non-printed lines along the page in the direction of
the paper travel from the leading edge to the trailing edge.
Warning
Allow the Fuser to cool before servicing the printer.
Initial Actions
• Check that the media settings match the media in use.
• Check that the media is dry and in good condition.
Troubleshooting Reference Table
Applicable Parts Example Print
■
Transfer Roller, PL1.1.11
■
Fuser, PL5.1.1
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1
Reseat P/J18 on the MCU Board,
and P/J201 on the LVPS.
Does the image print correctly? Complete. Go to Step 2.
2
Replace the Fuser (page 4-38).
Does the image print correctly? Complete. Replace the
Transfer Roller.
Smudges or Smears