Xerox Phaser 3010, Service Manual

Page: 311 / 430

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 4-101
Service Parts Disassembly
Power Switch Assembly
PL7.2.6
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Left Cover (page 4-64).
5. Remove the Right Cover (page 4-57).
6. Remove the Scanner (page 4-109).
7. Disconnect P/J7601 from the Front USB Board.
8. Disconnect P/J6501 from the WiFi Adaptor.
9. Remove the Top Cover (page 4-52).
10. Remove the Rear Cover (page 4-11).
11. Disconnect P/J201 from the LVPS.
12. Release the boss and raise the harness guide to access the upper screw that
secures the Power Switch Assembly.
13. Disconnect P/J200 from the LVPS and remove 1 screws (silver, metal with
washer 6mm) and 2 screws (silver metal, 6mm) that secure the Power Switch
Assembly.
Replacement Note
Capture the ground wire with the screw and washer.
s3040-089
P/J200