Xerox Phaser 3010, Service Manual

Page: 256 / 430

4-46 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Service Parts Disassembly
Power Switch Assembly
PL7.2.10
1. Remove the Main Tray (page 4-13).
2. Remove the Front Cover (page 4-15).
3. Remove the Right Cover (page 4-12).
4. Remove the Left Cover (page 4-16).
5. Remove the Top Cover (page 4-7).
6. Remove the Rear Cover (page 4-11).
7. Disconnect P/J201 from the LVPS.
8. Release the boss and raise the harness guide to access the upper screw that
secures the Power Switch Assembly.
9. Disconnect P/J200 from the LVPS and remove 1 screw (silver, metal with
washer 6mm) and 1 screw (silver metal, 6mm) that secure the Power Switch
Assembly.
s3040-136
AC Inlet Holder
P/J200
P/J201