Xerox Phaser 3010, Service Manual

Page: 300 / 430

4-90 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Service Parts Disassembly
Toner Motor
PL4.1.2
Note
The Toner motor ground wire is not captive to the chassis.
1. Remove the Main Tray (page 4-58).
2. Remove the Front Cover (page 4-60).
3. Remove the Inner Front Cover (page 4-62).
4. Remove the Toner Cartridge (page 4-5).
5. Remove the Right Cover (page 4-57).
6. Remove the Left Cover (page 4-64).
7. Remove the Scanner (page 4-109).
8. Disconnect P/J7601 from the Front USB Board.
9. Disconnect P/J6501 from the WiFi Adaptor.
10. Remove the Top Cover (page 4-52).
11. Disconnect P/J150 from the motor.
12. Remove 1 screw (silver, tap, 8 mm) that secures the motor and ground wire to
the chassis.
13. Rotate the motor CCW to release the mounting tab from the retainer.