Xerox Phaser 3010, Service Manual

Page: 202 / 430

3-28 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Image Quality
Unfused Image
The image is not completely fused to the paper. The image easily rubs off.
Warning
Allow the Fuser to cool before servicing the printer.
Initial Actions
• Check the media path.
• Check the Fuser connection.
Troubleshooting Reference Table
Applicable Parts Example Print
■
Fuser, PL5.1.1
■
MCU Board, PL7.1.3
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the media being used.
Is the media dry and
recommended? Go to Step 3. Replace with
dry, approved
media, then go
to Step 2.
2 Does the image print correctly? Complete. Go to Step 3.
3 Check the Toner type.
Is non-Xerox Toner in use? Replace toner,
then go to
Step 4. Go to Step 5.
4 Does the image print correctly? Complete. Go to Step 5.
5 Replace the Fuser (page 4-38).
Does the error persist? Go to Step 6. Complete.
6 Replace the MCU Board (page 4-43).
Does the error persist? Contact field
support for
assistance. Complete.
4510 051