Xerox Phaser 3010, Service Manual

Page: 194 / 430

3-20 Xerox Internal Use Only Phaser 3010/3040/WorkCentre 3045 Service
Image Quality
Horizontal Band, Voids, or Streaks
There are areas of the image that are extremely light or are missing entirely. These
missing areas form wide bands which cover a wide area horizontally, perpendicular
to the paper feed direction.
Warning
Allow the Fuser to cool before servicing the printer.
Initial Actions
• Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts Example Print
■
Transfer Roller, PL1.1.11
■
Toner Cartridge, P4.1.5
■
Fuser, PL5.1.1
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the paper condition.
Is the paper dry and approved for
use? Go to Step 2. Replace with
dry, approved
paper.
2 Compare defect spacing to the
Repeating Defects table (page 3-3).
Do any of the horizontal bands
match? Replace the
corresponding
parts. Contact your
designated
field support for
assistance.
Horizontal Band, Void, or Streaks