![Xerox Phaser 3010 Service Manual Download Page 190](http://html2.mh-extra.com/html/xerox/phaser-3010/phaser-3010_service-manual_3305354190.webp)
3-16
Xerox Internal Use Only
Phaser 3010/3040/WorkCentre 3045 Service
Image Quality
Vertical Blank Lines
There are faded or completely non-printed lines along the page in the direction of
the paper travel from the leading edge to the trailing edge.
Warning
Allow the Fuser to cool before servicing the printer.
Initial Actions
•
Ensure there is no debris on the media path.
Troubleshooting Reference Table
Applicable Parts
Example Print
■
Transfer Roller, PL1.1.11
■
Fuser, PL5.1.1
Troubleshooting Procedure Table
Step
Actions and Questions
Yes
No
1
Check media condition.
Is the media dry and approved for
use?
Go to Step 3.
Replace with
dry, approved
media, then go
to Step 3.
2
Does the image print correctly?
Complete.
Go to Step 3.
3
Replace the Transfer Roller
(page 4-10).
Does the image print correctly?
Complete.
Go to Step 4.
4
Replace the Fuser (page 4-38).
Complete.
Contact your
designated
field support for
assistance.
Vertical Blank Lines
Summary of Contents for Phaser 3010
